Vintage Husqvarna motorcycles from the scrapheap back to the racetrack. So far one 1970 CR 250 and two 1969 CR 400 done. Now working on a one of kind 1984 Husqvarna thumper.
Monday, April 23, 2012
Friday, April 13, 2012
Cylinder and carb
I will only use this cylinder as a dummy because of the crack in the liner, another cylinder and head is on order..
The clutch basket has to be pressed on to the bushing, I am using an old bearing as a spacer. Don't hammer it on, the bearings will be damaged. Make sure the basket and bushing spins freely on the shaft when you are done.
Subscribe to:
Posts (Atom)