Thursday, February 3, 2011

Engine rebuild part 1 (bottom end).

New bearings, seals and gaskets.

Engine cases cleaned, bearings and seals replaced. No play in connecting rod so it went back in.
Note marking on crank 1969.

Transmission cleaned and inspected, looks ok but is known to be a bit of a weak link in the 400cc engine.

Cases put back together.

Crank in the center.

Drivegear and clutch installed. 

1970 engine cleaned and new bearings fitted.

Crank in good condition, marked 1970.

Transmission inspected.

Transmission installed.,

Clutch was toast on this engine so new clutch plates went in.

Done for now.

No comments:

Post a Comment